DSMR 2 MQTT bridge

Introduction

This bridigng component reads Dutch Smart Meter Requirements (DSMR) telegrams and sends them to a MQTT broker using the Homie convention. The component is written in Python and is based on the execelent work of others:

DSMR Parser
Homie4

Configuration

Create some environment variables (e.g. with a .env file) to specify the required settings:

PYTHONPATH="."
MQTT_HOST=<mqtt-broker-hostname>
DSMR_PORT=/dev/ttyUSB0
DSMR_PROTOCOL=V5

If you have forwared the raw serial signal through ser2net, you should use DSMR_PORT=remote://<hostname>:<port>, e.g.:

DSMR_PORT=remote://forwarding-pi.local:3333

If you use credentials to access the MQTT broker, then alsp specify:

MQTT_USERNAME=<mqtt-user>
MQTT_PASSWORD=<mqtt-password>

Inspect the source app_settings.py to find out about the other less frequently used settings.

1.1 KiB Raw Blame History

DSMR 2 MQTT bridge

Introduction

Configuration

1.1 KiB

Raw Blame History